How to Replace the Replacement Key Battery For the Saab 9-3
Saab owners have to follow a series of steps that are unique to add a second ignition key. It requires dealer service with a handheld computer called Tech-2. Then the transponder is replaced and a key need to be purchased.
saab key fob replacement thekeylab.co.uk is a good idea to rotate your keys in order that one doesn't get damaged faster than the other. This will also keep your keys in top condition.
Replacement Case
The new key fobs do not look like the old Saab keys. They're equipped with electronic devices that make them difficult to copy. This has made theft of cars considerably more difficult than it was twenty years ago. However, it has also made the replacement of lost keys a much more costly endeavor.
Saab 9-3 owners must have two keys that work. If one is lost, it costs a fortune to purchase a new one for the car since it requires replacing the CIM module, and then reprogramming the locking cylinders. Dealers charge between $100-$200 to do this.
There are some ways around the high price. Certain parts suppliers will utilize the code of an old key to cut a brand new metal blade at a fraction the price of the dealer. The key must be exactly the same as the original for it to work in your vehicle.
Follow these steps to replace the case. You'll require a flathead screwdriver as well as some patience. With the screwdriver you can pull off the plastic and then remove the emergency key. Once the case is open, remove the electronics and put them in your new case. Make sure to insert the correct key and badge back into the case as well.
Replacement Battery
The replacement battery for the Saab 9-3 is a cheap component that can be replaced easily and quickly. This YouTube tutorial for DIY user Cyclone Cyd explains how to replace the remote key fob battery in just four steps. This tutorial should work for any modern saab-type key fob, however the procedure might differ slightly.
The button is normally located near the Saab logo on the back of the fob. This is usually located close to the Saab logo on the back of the fob. Next you will need a flathead screwdriver into the small hole of this button. This should be enough to let the fob case open so that you can change the battery.
Once you have installed the new CR1632 batteries, you can restore the remote key fob. Then, you can program it into your car. The whole process should take more than an hour or less. It's a very easy procedure that doesn't require any special tools.
The process is a bit more complicated if you lose your key, but it is possible. The dealer has to first verify the VIN of the vehicle and order a replacement TWICE module and key blade that is matched to the unique code. Then, they'll have to cut the new key and then program it using the latest software tool known as MDI.
Replacement Key Fob
The key fob contains batteries that are used to lock and unlock your car. The batteries are able to last for that is a long time, and they eventually die. This is a problem that occurs with all cars. The good thing is that you can replace the battery in most key fobs, without having to replace the entire case. You can purchase replacement fobs from Amazon that include all the electronics already in place, so you'll simply open the case and replace those batteries that are old. You will need to remove the emergency key before you replace the batteries. To accomplish this, simply insert a small screwdriver that is flat into the slot in the middle of the. Work the screwdriver around the case, and it will split open, making it easier to remove.
When you're ready to replace the keys ensure that you have a spare, because this can cut down the total cost by a significant amount. If you have spare keys, you can ask the dealer to cut the new key and program it to the car, which is much cheaper than replacing the entire key fob.
If you don't have a spare you can add an additional key to your car, but this requires a lot research and effort. Adding a second key costs about a few hundred dollars and it also requires the programming of the car's computer. This can be done by a professional, however it is an expensive option for the majority of owners.
Replacement Ignition
Contrary to the earlier Saab automobiles, the current SAAB 9-3 models use an advanced alarm system that is built on a key code. This means that in the event that you lose your only working key, acquiring an additional one could be extremely costly since the car needs to have a computer module added and it must also be designed to accept a different key. Even a dealer can charge hundreds of dollars to program a new key even if they're unable to do it.
If you've lost only one working key, a dealer will replace your car's computer (known as the CIM or SAAB TWICE) to make a replacement, and will charge top dollar for it. We can reprogram the current EEPROM of your car's computer so that it's ready for an additional key. This will save you more than 50% off what you would spend at a dealer.
If you've been a faithful owner of an 03-11 SAAB 9-3, then you likely realize that the ignition key isn't very robust. If your ignition key isn't functioning properly, it is time to think about replacing it. They can become sticky and the buttons are known to fall off. It's not as difficult as it appears to replace the ignition key. With the appropriate tools, it could be accomplished in a matter of minutes.